Product Categories

MS79005 Pressure Sensor Die (0-0.5 bar)

MS79005 Pressure Sensor Die (0-0.5 bar) - click to enlarge
MS79005 Pressure Sensor Die (0-0.5 bar)
Model Number: 




Categories:  Intersema

Product Description:

1) Uncompensated pressure sensor die
2) Output Span 150mV @ 5V
3) Temperature Range -40°…+125°C
4) Linearity 0.05% (typical)
5) Very small Die Size 1.78 x 1.78mm (MS79005-A)
6) High Reliability, Low Cost
7) Absolute or differential pressure sensor
1) Variometers
2) Water level sensors

The sensor element of the MS79005 consists of a silicon micro-machined membrane. Implanted resistors make use of the piezo-resistive effect to sense the membrane deflection and transform it in an electrical signal. This sensor, which has outstanding linearity and span values, is available in various configurations. The absolute pressure sensor employs a sealed vacuum reference cavity underneath the membrane. The Pyrex glass wafer used for this sealing has a thickness of 0.2 mm (MS79005-A_0.2) or 0.5 mm (MS79005-A_0.5). Two gauge versions available: one with a drilled Pyrex glass (MS79005-D) and the other without Pyrex glass (MS79005-S).


Tel: +86(0755)83680810

QQ: 710258725