Product Categories

MS7902 Pressure Sensor Die (0-2 bar)

MS7902 Pressure Sensor Die (0-2 bar) - click to enlarge
MS7902 Pressure Sensor Die (0-2 bar)
Model Number: 




Categories:  Intersema

Product Description:

1) 0 to 200 kPa range (2 bar or 29 PSI)
2) Uncompensated pressure sensor die
3) Output span 150mV @ 5V
4) Temperature range -40°…+125°C
5) High linearity 0.05% (typical)
6) Very small die size 1.72 x 1.58 mm (MS7902-A)
7) Low cost, high reliability
8) Absolute or differential pressure sensors

1) Engine controls
2) Diving computer

The sensor element of the MS7902 consists of a silicon micro-machined membrane. Implanted resistors make use of the piezo-resistive effect to sense the membrane deflection and transform it in an electrical signal. This sensor, which has outstanding linearity and span values, is available in various configurations. The absolute pressure sensor employs a sealed vacuum reference cavity underneath the membrane. The Pyrex glass wafer used for this sealing has a thickness of 0.2 mm (MS7902-A_0.2) or 0.5 mm (MS7902-A_0.5). There are two gauge versions available: one with a drilled Pyrex glass (MS7902-D) and the other without Pyrex glass (MS7902-S).


Tel: +86(0755)83680810

QQ: 710258725